The Head & Tailstock Positioner rotates long, rectangular steel structures that are supported at both ends. The Headstock Positioner is fixed to the floor and features a 360° variable powered rotation speed, as well as adjustable center rotation height (up and down). The tailstock features idler rotation, adjustable height, and powered center rotation. The unit is mounted over idler bogies to adjust the workpiece length. The set provides the welder with ergonomic access to the workpiece's welds. Headstock and Tailstock Welding Positioner, also known as Headstock Positioner and Tailstock Positioner.
Gallery
Specifications
Head & Tail Stock Max load and rotation capacity: 20 MT @ 250 mm ECC
Head Stock only (overhung): 10.0 MT @ Maximum 250 mm ECC
10.0 MT @ 250 mm GC
7.00 MT @ 350 mm GC
5.50 MT @ 450 mm GC
4.50 MT @ 550 mm GC
3.50 MT @ 650 mm GC
3.30 MT @ 750 mm GC
3.00 MT @ 850 mm GC
2.50 MT @ 950 mm GC
GC: Center of Gravity in mm measured from the Headstock table surface.
ECC: Eccentricity in mm
Head Stock: Fixed to the floor.
Tail Stock: Mounted on idler bogies to adjust workpiece length.
Adjustable Rotation Center: From 1,350 up to 2,350 mm
Effective stroke vertically: 1,000 mm
Elevation speed: 500 mm/min
Rotation speed: From 0.10 to 1.00 RPM
Table diameter: 1,700 mm
Table with “T” shaped channels @ 45 degrees
Control Box: Forward/Stop/Reverse/Wireless speed adjustment with digital display
Power: 16.50 kW
Electric Input Power: 480/60/3 or 380/50/3
Estimated Weight: 15.00 MT
Rail & chuck: Not included.
Warranty: One year
Operation Manual & Electric Diagram: Included
HT 20 Layout Drawing
Three-Jaw Self-Centring Welding Gripper Chucks
Model 3J-615-1 MT: 85 to 615 mm Ø
Model 3J-1080-1 MT: 85 to 1,080 mm Ø
Model 3J- 1250-2 MT: 200 to 1,250 mm Ø
Model 3J-1500-3 MT: 200 to 1,500 mm Ø
Irizar Chucks are designed for welding at low speed, not for use on a lathe at high speed.
Delivery Time
Custom Built
