Compatible with Traditional Construction Method (Bottom to Top). Apply double circumferential SAW (Submerged Arc Welding) seams simultaneously inside and outside the tank. It drives hanging on the tank’s upper edge. Input power: 120/240/1P/50/60. Included: Two Lincoln PowerPlus 1000 HD (380/480/3/50/60) with Intertek certification SPE-1000; plus, two welding head controllers and two wire feeders. Not included welding cables. Required: Two cables of 120 mm² x 60 m for welding up to 600 amps. Four cables for welding up to 800 amps. Six cables for welding up to 1000 amps.
Frequently Asked Questions (FAQ)
Knowledge Base (KB)
3D AGW-2 Model Traditional Method
Specifications:
Trolley motorized speed: 200 up to 2,900 mm/minute.
Trolley manual: Quick move with clutch lever
Plate height: 1.5 to 3.0 m
Tank diameter: Minimum 8.0 m
Plate thickness: 8 to 50 mm
Weight (fixture itself): 1,360 kilos
Dimensions AGW-2: 3.10 m (L) x 2.50 m (W) x 2.65 m (H)
Dimensions power source storage box: 1.30 m (L) x 1.10 m (W) x 1.30 m (H) @ 2 units
Input Power: 120/240 V, 50/60 Hz, 1 P
Power: 0.19 kW
Warranty: One year
Included:
• Heavy-duty motorized carriage: Two units
• Control Box: Forward/Stop/Reverse/Speed Adjustment with display in mm/min
• Frequency driver.
• Wire reel for 60 lbs coil: Two units.
• One contact nozzle assembly for 3/32” (2.4 mm)
• One contact nozzle assembly for 1/8” (3.2 mm)
• One contact nozzle assembly for 5/32” (4.0 mm)
• One contact tip 3/32” (2.4 mm).
• Flux recovery & delivery system: Two sets.
• Flux belt 4” x 40”
• Flux assembly with 150 mm wheel diameter.
• Flux Hopper with 20 kilos capacity.
• Manual welding head (X-Y) cross slide with 6” stroke: Two
• Power cable 2.5 mm² *4 wires* 60 m: Two units.
• Control cable 1.5 mm² *10 wires* 60 m: Two units
• Electric control panel: One
• Power source steel storage box: Two units
• Operation Manual & Electric Diagram
• One-year Warranty
Not included:
Welding cable 120 mm² x 60 m.
Delivery Time:
Within Canada: Three to five business days
USA & US-Mexican border: One week
Latino America: Four weeks
World-Wide: Five to six weeks
Notes:
1. Our company recommends consulting a Certified Welding Engineer (CWEng) to design the welding procedure in accordance with the relevant national and provincial codes and standards. In Canada, CWEngs are certified by the Canadian Welding Bureau (CWB). In contrast, in the USA, they are accredited by the American Society of Mechanical Engineers (ASME), the American Welding Society (AWS), and the American Petroleum Institute (API), among other prestigious organizations worldwide. A CWEng is responsible for designing and selecting the appropriate welding parameters, which include plate beveling, wire and flux specifications, amperage, voltage, and welding speed, among other factors.
2. Irizar does not offer training, as the machine is straightforward to operate. However, it must be operated by an experienced Submerged Arc Welding (SAW) Operator. Certification is required for this trade, meaning the operator holds a certification as a journeyperson. Irizar rental facility is available in Wetaskiwin, AB, Canada, where customer welder operators can familiarize themselves with the equipment and obtain coupons for qualifying Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and Welder Qualification Tests (WQT). Otherwise, we recommend purchasing the machine in advance and making it work in your shop before setting it up on the jobsite
Irizar Jobsite Requirements:
• The user should provide a steel base plate with beveling, wire and flux.
• Minimum rental of five business days in an eight-hour shift. Includes: Two AGW-1-C and one SAW Welding Tractor.
• Maximum two operators at a time and one supervisor.
• Booking: Two to four weeks in advance.
• The user is required to provide a certificate of liability insurance.