Description: 

The Head & Tailstock Positioner rotates long, rectangular steel structures that are supported at both ends. The Headstock Positioner is fixed to the floor and features a 360° variable powered rotation speed, as well as adjustable center rotation height (up and down). The tailstock features idler rotation and adjustable height, as well as powered center rotation. The unit is mounted over idler bogies to adjust the workpiece length. The set provides the welder with ergonomic access to the workpiece welds. Headstock and Tailstock Welding Positioner, also known as Headstock Positioner and Tailstock Positioner.

 

Specifications: 

Head & Tail Stock Max load and rotation capacity: 75 MT @ 250 mm ECC
Head Stock only (overhung): 37.50 MT @ Maximum 250 mm ECC

37.5 MT @ 250 mm GC
26.0 MT @ 350 mm GC
20.0 MT @ 450 mm GC
17.0 MT @ 550 mm GC
14.0 MT @ 650 mm GC
12.0 MT @ 750 mm GC
11.0 MT @ 850 mm GC
10.0 MT @ 950 mm GC
9.00 MT @ 1,000 mm GC

GC: Center of Gravity in mm measured from the Headstock table surface.
ECC: Eccentricity in mm

 

Head Stock: Fixed to the floor.
Tail Stock: Mounted on idler bogies to adjust workpiece length.
Adjustable Rotation Center: From 1,350 up to 2,350 mm
Effective stroke vertically: 1,000 mm
Elevation speed: 500 mm/min
Rotation speed: From 0.05 to 0.50 RPM
Table diameter: 1,700 mm
Table with “T” shaped channels @ 45 degrees
Control Box: Forward/Stop/Reverse/Wireless speed adjustment with digital display
Power: 35.00 kW
Electric Input Power: 480/60/3 or 380/50/3
Estimated Weight: 65.00 MT
Rail & chuck: Not included.
Warranty: One year
Operation Manual & Electric Diagram: Included

 

Delivery Time: 

IMG_5837.jpg