Descripcion:
The Head & Tailstock Positioner rotates long, rectangular steel structures that are supported at both ends. The Headstock Positioner is fixed to the floor and features a 360° variable powered rotation speed, as well as adjustable center rotation height (up and down). The tailstock features idler rotation and adjustable height, as well as powered center rotation. The unit is mounted over idler bogies to adjust the workpiece length. The set provides the welder with ergonomic access to the workpiece welds. Headstock and Tailstock Welding Positioner, also known as Headstock Positioner and Tailstock Positioner.
Specifications:
Head & Tail Stock Max load and rotation capacity: 5 MT @ 200 mm ECC
Head Stock only (overhung): 2.50 MT @ Maximum 200 mm ECC
2.50 MT @ 250 mm GC
1.70 MT @ 350 mm GC
1.40 MT @ 450 mm GC
1.10 MT @ 550 mm GC
0.90 MT @ 650 mm GC
0.80 MT @ 750 mm GC
0.70 MT @ 850 mm GC
GC: Center of Gravity in mm measured from the Headstock table surface.
ECC: Eccentricity in mm
Head Stock: Fixed to the floor.
Tail Stock: Mounted on idler bogies to adjust workpiece length.
Adjustable Rotation Center: From 800 up to 1,800 mm
Effective stroke vertically: 1,000 mm
Elevation speed: 600 mm/min
Rotation speed: From 0.10 to 1.00 RPM
Table diameter: 1,000 mm
Table with “T” shaped channels @ 45 degrees
Control Box: Forward/Stop/Reverse/Wireless speed adjustment with digital display
Power: 4.40 kW
Electric Input Power: 480/60/3 or 380/50/3
Estimated Weight: 6.60 MT
Rail & chuck: Not included.
Warranty: One year
Operation Manual & Electric Diagram: Included
Delivery Time:
Within Canada: Three to five business days
USA & US-Mexican border: One week
Latino America: Four weeks
World-Wide: Five to six weeks