Tank Jacking Eqp


J. IRIZAR & COMPANY LTD
3123 - 43 Ave. Edmonton Alberta T6T 1C7 Canada
Phone: 1 780 450 6695, Fax: 1 780 485 6677

E mail:
jirizar@jirizar.com
Web: www.jirizar.com

BROCHURES  VIDEO  MANUAL  SET UP VIDEO

 AVAVAILABLE FOR RENT   T

Tank Jacking Advantages: a) Tank erection from top downwards shorter erection time, break the cost and improves the quality, b)   Work is done at ground level. Telescopic cranes are not longer required, c) Safe for lifting and safe for job site workers. Accidents risk are reduced due to scaffolding is not longer needed, d) Simple set up, operation and dismantle, e) Flexible: Jacking equipment can split for erection of two smaller tanks or expanded for built larger tanks by means of adding extra jacks/trestles and/or power pack combined with the existing one, f) Low maintenance required, g) Work is practically unaffected by rain, snow, hail, and wind because it can be carried out under the protection of the tank itself. Welding takes place mainly under cover, h) Jacking System can be used for construction of new tanks, dismantling of tanks, replacing tank base or foundation repair, and increasing tank capacity
 
Operation: Jacks are connected to a common peripheral hydraulic circuit of high-pressure hoses, and operated from an electric pump unit (power pack) which works with repeated climbs of 10 cm. Each climb is retracted mating to consequent plate ring is achieved by controlled return of the previously made climb

Experience:
Our Jacking System has been used for the erection of more than 2,000 tanks, up to 80 m in diameter and 1900 tons of lifting weight, on oil refineries, petrochemical plants, fertiliser plants, power generating stations, petroleum product installations & depots, and at liquid storage terminals at ports.

Available: a) Equipment for rent, b) Training Facility in Alberta Canada, c) Training at customer job site World Wide

Our Tank Erection Equipment has been used to erect tanks up to 80 m diameter & 1900 tons weight.....   More then 2,000 tanks have been erected with our jacking systems....

REQUEST FORM

Company Name

Name

Title

Street

City

Zip Code

Country

Telephone

Fax

E mail

PROJECT INFORMATION

Tank diameter (m)

Lifting weight excluding bottom plate, annular plate and foot ring (tons)

Max plate height (mm)

Tank height (m)

Electric input power supply (V, Hz, P)

Additional information

PHOTOS

Jack Model HLJ-12 has 12 tons lifting capacity and tested at 1.5 times its work capacity. This model has been used for lifting up to 1,900 ton tank weight.

Hydraulic jack while is tested on a Universal Testing Machine

12 T & 18 T Jack Available 25 Ton Jack 

Hydraulic
Power Packs

Go to Tank Welders compatible with tank erection equipment

Jacks & Trestles 
Lifting a Tank
@ Job site

  
     
     

Our products exceed international standards: Tank Jacking Equipment, Tank Erection Equipment, Hydraulic Tank Lifting Jacks, Tank Lifting Service. Available new, used and reconditioned - refurbished -, for rent only in North America.

Home Tank Turning Rolls Pipe Rotators Manipulators Positioners Plate Bending Rolls Seam Welders Tank Welders Tank Jacking Eqp Rental Videos & Manuals Contact Us